中圖分類號：TH85+5 文獻標志碼：A DOI: 10.16157/j.issn.0258-7998.245951 中文引用格式： 余杰，王健,，侯姝悅,，等. 基于FPGA的多通道橇載數據采集存儲系統設計[J]. 電子技術應用，2025,，51(5)：87-92. 英文引用格式： Yu Jie,，Wang Jian，Hou Shuyue,，et al. Design of multi-channel skid data acquisition system based on FPGA[J]. Application of Electronic Technique,，2025,，51(5)：87-92.
Design of multi-channel skid data acquisition system based on FPGA
1.School of Instrument and Electronics， North University of China,；2.State Key Laboratory of Dynamic Measurement Technology Jointly Built by North University of China
Abstract： Aiming at the problems of difficult data measurement and low accuracy in the extreme environment of rocket skid test, a multi-channel, high-precision data acquisition and storage system based on FPGA is designed. The system can regulate the analog signal output by the sensor, use FPGA as the main control chip, control two AD7606 chips to synchronize the acquisition of 12 channels, and process the collected data in real time and store it to the Flash chip. The PC host can read back the data stored to Flash and map the data. And through the sealing process, the system has the characteristics of high impact resistance, high overload. The test shows that the system realizes the real-time synchronous collection of 12 channels, and the non-linear error of the measurement results is not more than 1%, which can meet the reliability requirements of data collection and storage in the rocket skid test environment.
Key words : skid test,；FPGA；A/D conversion,；collection and storage
