基本特性：

MAX1358/MAX1359數據采集系統內置二極管結溫度傳感器,，利用二極管的I-V特性測量溫度,，為了提高測量精度，Maxim器件將校準系數存儲在數據采集系統內部,，修正讀數誤差,，以獲得最高精度,。

溫度讀數對應于二極管的實際結溫，對于連續監測溫度變化的系統，可以直接使用溫度讀數,。對于需要獲得封裝外部溫度的應用,，需要對讀數進行調整才能得到更準確的數值。

方案描述：
  
The serial port that will be used to communicate with the EV kit needs to be set. From the applications File menu, select the Connect menu item. The MAX1358 has a number of jumpers configured by default to quickly start using the EV kit.

MAX1358 Data-Acquisition System

♦ Graphical User Interface (GUI) for EV Kit Control
♦ MAXQ2000 Microcomputer
64kB (32k x 16) Flash Memory
2kB (1k x 16) Data RAM
♦ UART-to-RS-232 Physical Interface
♦ Serial Memories
2kB IIC EEPROM
4kB SPI™ EEPROM
512 Bytes 1-Wire
♦ Internal and External Temperature Sensors
♦ MAX1358 Internal Temperature Sensors
External Transistor Temperature Sensor
External Linear Temperature Sensor
External Thermistor
♦ Piezo Buzzer

參照原理圖：


                                原理圖1


                              原理圖2


                                   原理圖3


參考PCB圖：



                                 PCB圖1


                                     PCB圖2

                                        PCB圖3